65X-DOS/doc/syscalls.md

379 lines
9.5 KiB
Markdown
Raw Normal View History

2024-07-08 06:42:08 +02:00
# System Calls
2024-07-08 23:14:01 +02:00
The system API is exposed to user code using the COP interrupt.
The B accumulator is loaded with a function number;
2024-07-08 06:42:08 +02:00
the other registers are loaded with call-specific data (or nothing),
and any return values are placed in the same registers.
What follows is a list of the system calls, their numbers, and
register arguments they take, and what if any values they return.
2024-07-08 23:14:01 +02:00
The system API is based loosely on, but not compatible with, that of
CP/M-3 and MSX-DOS 2.
2024-07-08 23:09:29 +02:00
2024-07-09 05:25:34 +02:00
Most calls return a status code in C. This code has one value, STATUS_OK,
which applies to all such calls; this value indicates that the call was
successful. Any other value will indicate some specific error.
2024-07-08 23:14:01 +02:00
## 0x00: Terminate with Error Code
2024-07-08 23:09:29 +02:00
2024-07-09 05:25:58 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x00
X: Error code
2024-07-08 23:09:29 +02:00
Return Values:
This call does not return.
This call exits the calling program, setting the exit status code
for the system on its way out. Program control will be returned to
the command shell.
2024-07-08 23:14:01 +02:00
## 0x01: Console Input
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x01
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-08 23:14:01 +02:00
C: Character read from stdin
2024-07-08 23:09:29 +02:00
This call reads one character from standard input. If there is no character
ready, this call waits until there is one. The read character will also be
echoed to the screen, just as if it had been passed to the Console Output
call.
This call traps certain sequences of characters for "terminal control"
purposes. When this call traps such a character, it outputs nothing an
continues waiting for another character to be ready.
2024-07-08 23:14:01 +02:00
## 0x02: Console Output
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x02
X: Character to output
2024-07-08 23:09:29 +02:00
Return Values:
None
This call sends a single chracter to the standard output, which is usually
the terminal emulator. The character will be parsed by the terminal emulator
to handle control characters and escape sequences.
2024-07-08 23:14:01 +02:00
## 0x03: Direct Console Input
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x03
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-09 04:06:32 +02:00
C: Character value or NULL
2024-07-08 23:09:29 +02:00
This call does direct (raw) console input; if there is a character ready, it
will be read, and if not, NULL will be returned.
2024-07-08 23:14:01 +02:00
## 0x04: Direct Console Output
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x04
X: Character value
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-09 04:06:32 +02:00
None
2024-07-08 23:09:29 +02:00
This call does direct (raw) console output; the value supplied will be treated
as the value to write to screen memory, and will not be interpreted for terminal
control.
2024-07-08 23:14:01 +02:00
## 0x05: String Output
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x05
X: Address of string (15:0)
Y: Address of string (23:16)
2024-07-08 23:09:29 +02:00
Return Values:
None
This call uses the 0x02 call "Console Output" above to send a NULL-terminated
string to stdout.
2024-07-08 23:14:01 +02:00
## 0x06: Buffered Line Input
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x06
X: Address of buffer (15:0)
Y: Address of buffer (23:16)
2024-07-08 23:09:29 +02:00
Return values:
2024-07-09 04:06:32 +02:00
C: Status code
2024-07-08 23:09:29 +02:00
This call will read up to 255 characters from stdin, or up to the first newline,
whichever comes first. While taking input, a simple line editor is presented to
the user. When the 255th character has been entered into the buffer, any further
input will be ignored until a newline is entered.
2024-07-08 23:14:01 +02:00
The newline in the resulting buffer will be replaced with a NULL to terminate the
2024-07-08 23:09:29 +02:00
string.
2024-07-08 23:14:01 +02:00
## 0x07: Console Status
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x07
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-08 23:14:01 +02:00
C: Status Code
2024-07-08 23:09:29 +02:00
This call checks stdin for a character to read. If there is none, this call will return
2024-07-09 04:06:32 +02:00
zero in C; if there is a character ready, it will return nonzero in C.
2024-07-08 23:09:29 +02:00
2024-07-08 23:14:01 +02:00
## 0x08: Return Version Number
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x08
2024-07-08 23:09:29 +02:00
Return Values:
C: Major version
2024-07-08 23:14:01 +02:00
X: Minor version
Y: Micro version
2024-07-08 23:09:29 +02:00
This call returns the version number of the kernel.
2024-07-08 23:14:01 +02:00
## 0x09: Get Date
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x09
X: Bank of buffer
Y: Address of buffer
2024-07-08 23:09:29 +02:00
Return Values:
None
This call fills in the specified buffer with the current date,
in the following format:
struct {
uint16_t year // Current year
uint8_t month; // 1 = January..12 = December
uint8_t day; // 1..31
uint8_t weekday; // 0 = Sunday..6=Saturday
}
2024-07-08 23:14:01 +02:00
## 0x0A: Set Date
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x0A
X: Bank of buffer
Y: Address of buffer
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-09 04:15:36 +02:00
C: Status code
2024-07-08 23:09:29 +02:00
2024-07-09 04:15:36 +02:00
Argument Structure:
2024-07-08 23:09:29 +02:00
struct {
uint16_t year // Current year
uint8_t month; // 1 = January..12 = December
uint8_t day; // 1..31
uint8_t weekday; // 0 = Sunday..6=Saturday
};
2024-07-09 04:15:36 +02:00
This call sets the system date from the data in the argument structure.
2024-07-08 23:14:01 +02:00
## 0x0B: Get Time
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x0B
X: Bank of buffer
Y: Address of buffer
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-09 05:14:59 +02:00
C: Status code
2024-07-08 23:09:29 +02:00
2024-07-09 04:15:36 +02:00
Argument Structure:
2024-07-08 23:09:29 +02:00
struct {
uint8_t hour; // 0..23
uint8_t minute; // 0..59
uint8_t second; // 0..59
};
2024-07-09 04:15:36 +02:00
This call fills in the specified argument structure with the current time.
2024-07-08 23:14:01 +02:00
## 0x0C: Set Time
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x0C
2024-07-09 04:15:36 +02:00
X: Bank of argument structure
2024-07-08 23:14:01 +02:00
Y: Address of buffer
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-09 04:15:36 +02:00
C: Status code
2024-07-08 23:09:29 +02:00
2024-07-09 04:15:36 +02:00
Argument Structure:
2024-07-08 23:09:29 +02:00
struct {
uint8_t hour; // 0..23
uint8_t minute; // 0..59
uint8_t second; // 0..59
};
2024-07-09 04:15:36 +02:00
This call sets the current time from the provided argument structure.
2024-07-08 23:14:01 +02:00
## 0x0D: Open File
2024-07-08 23:09:29 +02:00
Arguments:
2024-07-08 23:14:01 +02:00
C: 0x0D
X: Bank of pathname string
Y: Address of pathname string
2024-07-08 23:09:29 +02:00
Return Values:
2024-07-09 04:15:36 +02:00
C: Status code
2024-07-09 05:14:59 +02:00
X: File handle
2024-07-08 23:09:29 +02:00
This call attempts to open the file referred to by the provided NULL-terminated
string, which must contain a fully-qualified pathname -- something of the form
`[drive]:/[dir]/[dir2]/filename.ext`, such as `sd0:/games/kaboom/readme.ansi`.
2024-07-09 04:15:36 +02:00
If the file is successfully opened, the C accumulator will contain STATUS_OK, and
2024-07-09 05:14:59 +02:00
the X register will contain the file handle. On error, the C accumulator will contain
2024-07-09 04:15:36 +02:00
a negative value indicating which error has occured.
2024-07-08 23:24:17 +02:00
2024-07-09 05:14:59 +02:00
## 0x0E: Close File Handle
2024-07-08 23:24:17 +02:00
Arguments:
C: 0x0E
X: File handle
Return Values:
2024-07-09 04:06:32 +02:00
C: Status code
2024-07-08 23:24:17 +02:00
This call attempts to close the file referred to by the provided file handle.
2024-07-09 04:06:32 +02:00
On success, the C accumulator will contain a status code of STATUS_OK. On error,
the C accumulator will contain a negative value, indicating an error has occured.
2024-07-08 23:24:17 +02:00
## 0x0F: Duplicate File Handle
Arguments:
C: 0x0F
X: File handle
Return Values:
2024-07-09 04:06:32 +02:00
C: Status code
X: Duplicate of file handle
2024-07-08 23:24:17 +02:00
This call attempts to duplicate the provided file handle. The new file handle
will be exactly identical to the provided one, and either may be used at any time.
2024-07-09 04:06:32 +02:00
On success, the C accumulator will contain a status code of STATUS_OK, and the X
register will contain the duplicate file handle. On error, the C accumulator will
2024-07-09 04:15:36 +02:00
contain a negative value, indicating an error has occured.
2024-07-09 05:14:59 +02:00
## 0x10: Read from File
2024-07-09 04:15:36 +02:00
Arguments:
C: 0x10
X: Bank of argument block
2024-07-09 05:14:59 +02:00
Y: Address of argument block
2024-07-09 04:15:36 +02:00
Return Values:
2024-07-09 05:14:59 +02:00
C: Status code
X: Number of bytes actually read
2024-07-09 04:15:36 +02:00
Argument block structure:
struct {
void *dest; // Pointer to the buffer to use.
uint16_t file; // File handle.
size_t length; // Maximum number of bytes to read.
};
This call attempts to read up to `length` bytes from the file handle `file`, into
the buffer pointed to by `dest`. On success, the C accumulator will contain STATUS_OK,
2024-07-09 05:14:59 +02:00
and the X register will contain the number of bytes actually read. On error, the C
2024-07-09 04:15:36 +02:00
accumulator will contain a negative value indicating the specific error, and the X
2024-07-09 05:07:36 +02:00
register will contain the number of bytes actually read.
2024-07-09 05:14:59 +02:00
## 0x11: Write to File
2024-07-09 05:07:36 +02:00
Arguments:
C: 0x11
X: Bank of argument block
2024-07-09 05:14:59 +02:00
Y: Address of argument block
2024-07-09 05:07:36 +02:00
Return Values:
2024-07-09 05:14:59 +02:00
C: Status code
X: Number of bytes actually written
2024-07-09 05:07:36 +02:00
Argument block structure:
struct {
void *src; // Pointer to the buffer to use.
uint16_t file; // File handle.
size_t length; // Maximum number of bytes to write.
};
This call attempts to write up to `length` bytes to the file handle `file`, from
the buffer pointed to by `src`. On success, the C accumulator will contain STATUS_OK,
2024-07-09 05:14:59 +02:00
and the X register will contain the number of bytes actually written. On error, the C
2024-07-09 05:07:36 +02:00
accumulator will contain a negative value indicating the specific error, and the X
2024-07-09 05:14:59 +02:00
register will contain the number of bytes actually written.
2024-07-09 05:25:58 +02:00
## 0x12: Seek in File
2024-07-09 05:14:59 +02:00
Arguments:
C: 0x12
X: Seek value
Y: Seek origin
0x00: Seek relative to the beginning of the file
2024-07-09 05:25:58 +02:00
0x01: Seek relative to the current position in the file
0x02: Seek relative to the end of the file
2024-07-09 05:14:59 +02:00
Return value:
C: Status code
X: New file position (31:16)
2024-07-09 05:25:58 +02:00
Y: New file position (15:0)
2024-07-09 05:14:59 +02:00
This call moves the internal file pointer, the position in the specified file from
which data can be read or to which data can be written. On success, this call returns
STATUS_OK in C, and the new file position in X and Y. On error, C will contain a negative
2024-07-09 05:25:58 +02:00
value indicating the specific error, and the new file position in X and Y.
2024-07-09 05:24:40 +02:00
2024-07-09 05:25:58 +02:00
## 0x13: Device I/O Control
2024-07-09 05:24:40 +02:00
This call performs driver-specific functions.
2024-07-09 05:25:58 +02:00
## 0x14: Delete File
2024-07-09 05:24:40 +02:00
Arguments:
C: 0x14
X: Bank of pathname
2024-07-09 05:25:58 +02:00
Y: Address of pathname
2024-07-09 05:24:40 +02:00
Return Values:
C: Status code
This call attempts to delete the file indicated by the given NULL-terminated string,
2024-07-09 05:25:58 +02:00
which must contain a fully-qualified pathname. On success, this C will contain
STATUS_OK. On failure, C will contain a negative number indicating the specific
2024-07-09 05:24:40 +02:00
error.
## 0x15: Move File
Arguments:
2024-07-09 05:25:58 +02:00
C: 0x15
X: Bank of argument structure
Y: Address of argument structure
2024-07-09 05:24:40 +02:00
Return Values:
C: Status code
Argument Structure:
struct {
char *src; // Fully-qualified source pathname.
char *dest; // Fully-qualified destination pathname.
};
This call attempts to move or rename the specified `source` file to `dest`. On success,
2024-07-09 05:25:58 +02:00
C will contain STATUS_OK. On error, C will contain a negative value indicating the
2024-07-09 05:24:40 +02:00
specific error.